Controller | Arduino | ATMEGA328 | 7÷12VDC | PWM: 6 | Anal.in: 8
Module: converter | D-Sub 9pin,pin strips | Interface: GPIO,RS232
Sensor: distance | ultrasonic | 3.3÷5VDC | RS232 | 0.05÷5m | f: 10Hz
Stepper motor controller | DRV8434A | 1.2A | Uin mot: 4.5÷48V | green
Motor: DC | with gearbox | Medium Power | 6VDC | 670mA | Shaft: D spring
Wheel | yellow-black | Shaft: screw | screw | Ø: 80mm | Plating: rubber
Display: TFT | 1.54" | 240x240 | 27.72x27.72mm | Interface: GDI,SPI
Converter: step up / step down | Uout: 5V | Uin: 2.8÷22V | 2A | 85÷95%
Converter: step down | Uout: 9V | Uin: 11÷42V | 300mA | 80÷90% | 13x10mm
Display: LED | 24x8 | white | 24x58mm | FireBeetle | 3.3÷5VDC | -10÷85°C
Display: LED | 24x8 | red | 24x58mm | FireBeetle | 3.3÷5VDC | IC: HT1632C
Display: LED | 24x8 | green | 24x58mm | FireBeetle | 3.3÷5VDC | -10÷85°C
Display: LED | 24x8 | blue | 24x58mm | FireBeetle | 3.3÷5VDC | IC: HT1632C
Display: LED | 24x8 | yellow | 24x58mm | FireBeetle | 3.3÷5VDC | -10÷85°C
DC-motor driver | TB6612FNG | 32kHz | PWM,TTL | 1A | Uin mot: 2.5÷13.5V

