Stepper motor controller | DRV8434S | SPI | 1.2A | Uin mot: 4.5÷48V
Module: display | OLED display | FireBeetle | 3.7÷5.5VDC | I2C | 0.96"
Motor: DC | with gearbox | 2÷7.5VDC | 600mA | Shaft: D spring | 357rpm
Module: converter | USB-UART | USB B mini | 5VDC | 921.6kbps
Module: safety | 20x28.5mm | 3g | 33VDC | 15W | 4.1Ω | 0.5mA
Sensor: motion | microwave | digital | 5VDC | Channels: 1 | Gravity
Stepper motor controller | MP6500 | 1.5A | Uin mot: 4.5÷35V | red
Module: relay | Channels: 2 | 12VDC | max.250VAC | 10A | GPIO | toff: 5ms
Converter: step up / step down | Uout: 5V | Uin: 2.7÷11.8V | 1A
DC-motor driver | 100kHz | PWM | 1.9A | Uin mot: 4.5÷48V | Uin log: 5.5V
Module: safety | 20x28.5mm | 3g | 26.4VDC | 15W | 2.8Ω | 0.5mA
Sensor: accelerometer | 3.3÷5VDC | I2C | H3LIS200DL | ±100g,±200g
Module: power controller | ATX,pin strips | Application: ARDUINO
DC-motor driver | 100kHz | PWM | 1.9A | Uin mot: 4.5÷48V | Uin log: 5.5V
Sensor: pressure | analog | FSR 400 | Ø15mm | Range: 0,2÷20N
Stepper motor controller | DRV8434S | SPI | 1.2A | Uin mot: 4.5÷48V
Sensor: distance | reflective | 2.9÷5.5VDC | digital | Channels: 9
Converter: step up | Uout: 3.3V | Uin: 0.5÷5.5V | 1.2A | 70÷90% | 12x15mm
Sensor: distance | reflective | 2.9÷5.5VDC | analog | Channels: 8
Module: relay | shield | TTL | Application: ARDUINO | 240VAC | 60VDC

