IC: interface | transceiver | half duplex,RS422,RS485 | 500kbps | SO8
Microcontroller | SRAM: 512B | Flash: 16kB | LQFP80 | Comparators: 1
PMIC | DC/DC converter | Uin: 6.5÷40V | Uout: 12V | SO8 | buck
PMIC | DC/DC converter | Uin: 6.5÷40VDC | Uout: 3.3VDC | 0.5A | SO8 | SMD
IC: voltage reference source | 2.048V | ±0.1% | SO8 | tube | 10mA
PMIC | DC/DC converter | Uin: 6.5÷40VDC | Uout: 5VDC | 0.5A | SO8 | SMD
Transistor: N-MOSFET | unipolar | 80V | 150A | 300W | TO220-3
IC: instrumentation amplifier | 300kHz | Ch: 1 | 2.7÷18VDC | SOT23-5
PMIC | DC/DC converter | Uin: 5.5÷36VDC | Uout: 1.23÷31VDC | 2A | SO8
PMIC | DC/DC converter | Uin: 4÷60VDC | Uout: 5VDC | 1A | TO263-5 | SMD
IC: operational amplifier | 10MHz | Ch: 2 | ±2.25÷18VDC,4.5÷36VDC
IC: PMIC | PWM controller | SO8 | 0÷70°C | 4.2÷35V | tube | SMPS | 0÷92%
IC: driver | VQFN20 | Ch: 1 | 3÷5.5VDC | haptic (piezo) actuators
PMIC | DC/DC converter | Uin: 4÷40VDC | Uout: 5VDC | 1A | TO263-5 | SMD
IC: interface | line interface,line driver | 400Mbps | LVTTL | LVDS
IC: supervisor circuit | power on reset monitor (PoR) | push-pull
PMIC | DC/DC converter | Uin: 4.5÷40V | 3.3VDC | 1A | TO263-5 | SMD | Ch: 1

